-
This FPV A/V cable connects to your ActionCam via the USB port and allows for live video output for FPV use. One end has the micro USB connector, the other has four bare wire leads for connecting to your FPV transmitter. ActionCam cameras are compatible with this cable and support the live A/V out function, as well as some SJ4000 cameras with firmware N201405270ZV01 or later*.
-
-
Features: • Powerful 5.5V/6A Switching BEC • Optional programming card for convenient setup • Super fine throttle resolution provides first-rate and highly accurate linearity • Super smooth adjustable start-up mode • Constant RPM mode (governor mode) • Adjustable F3A brake. • 3 steps adjustable normal EMF brake • High anti-interference capability • Low voltage cut-off protection with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4 • Soft cut-off option at low voltage, slows motor RPM gradual rather than hard cutoff (LVC) • Low voltage cut-off can be disabled • Variable cut-off voltage / cell • Active free-wheeling circuit allows for unlimited "partial load" capability • LED status display • Adjustable motor timing from 0° to 30° • Blocked rotation protection (senses a jammed motor and stops motor rotation) • Motor reversing from ESC (no need to change ESC/motor wires) • Over-temperature protection and overload alarm • Anti sparking circuit: reduces connection sparks (for HV ESC) • Throttle signal lose protection. If the signal is lost for 3 seconds, the power will automatically cut-off. • Safe power-on. (Motor will not start until throttle is returned to lowest position) Max Cont Current: 80A Max Burst Current: 100A for 10 seconds Input Voltage: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery BEC: 5.5V/6A Switching BEC PWM: 8~16 KHz Max RPM: 240,000rpm for 2 Poles Brushless Motor PCB Size: 50x30mm Weight: 70g (including wires) ***This ESC is compatible with both helicopter and airplane models.*** -
Specifications: Diameter: 600mm (adjustable) Weight: 450g Height: 248mm Assembled Landing Gear Width: 305mm Requires: 10-15 inch props 3 x Motors (recommended 2212, 2216, 3108, 3110, 3508, 4108) 3 x 20~40 amp ESC's Tri-copter capable flight controller 4 channel transmitter & receiver 3-4S LiPo battery -
For the distribution of power from the flight battery to your six ESC's, this 24k gold plated hub offers a very neat and efficient solution. It has 3.5mm bullet connectors and 6x 3mm terminals on the back. It is stable at high currents and has minimal power loss. Features: • High efficiency • Neat instillation • 3.5mm Bullet connectors • Easy solder 3mm holes • All necessary hardware included Specs: Dimensions: 28x19x8.5mm Weight: 7g -
Specifications: Wheelbase: 600mm Weight about 670g motor mount supports: 22 - 35 external diameter motors Recommended Configuration (Not included): Motor: 2216 KV900 Propeller: 11~14inch Battery: 4S 5000mAh Included: 1 x Y600 Frame Kit 1 x sticker sheet -
Specs: Constant Current: 20A Burst Current: 25A Battery: 2-4S Lipoly / 5-12s NiXX BEC: 5v / 3A Motor Type: Sensorless Brushless Size: 54 x 26 11mm Weight: 30g
