-
Capacity: 2200mAh Voltage: 3S1P / 3 Cell / 11.1V Discharge: 25C Constant Weight: 177g (including wire, plug & shrink wrap) Dimensions: 107x35x24mm Balance Plug: JST-XH Discharge plug: XT60 -
Specs: KV(RPM/V): 640 Lipo cells: 2~5s Max Watts(W): 550 Max. current: 30A (10 secs) No Load Current: 0.6A Intemal Resistance: 0.120 ohm Number of Poles: 14 Shaft Size: 4mm Dimensions(Dia.xL): 42 x 26mm Bolt Holes Spacing: 25mm Bolt thread: M3 Connector: 3.5mm bullet type connector Weight: 97g (motor only without adapters and screws)
-
-
Specification: Wingspan : 860mm Fuselage length : 650mm Material : EPO Weight: 700g Includes: • Phazer KX Airframe • Hardware set • Optional landing gear • Decal Set Requires: 4 Channel transmitter 64mm ducted fan unit ESC 40 Amp 3 X 9g Servo Lipo battery 11.1V-25C-2200mAh -
A small lightweight servo that is an upgraded version of the stalwart Towerpro MG90S analogue servo but with more torque, greater speed and the ability to rotate continuously through 360° at full travel, this 360° feature is perfect for robotic use. It is fitted with upgraded 6061-T6 aluminum gears and shafts and has a ballraced output. The middle case is made of alloy which acts as a heatsink for the motor and electronics which enables them to keep cool when being worked hard. Supplied complete with a selection of 3 servo horns and mounting screws. Features: • High resolution • Accurate positioning • Fast control response • Constant torque throughout the servo travel range • Excellent holding power • Ability to rotate continously through 360° in both directions Specs: Input Voltage: 4.8~6.6V Operating Torque: 2.1kg@4.8V, 2.4kg@6.6V Operating Speed: 0.6sec/60°@4.8V, 0.48sec/60°@6.6V Normal Servo Travel: 90° (45° each way) 360° when full travel is reached Case: Top & bottom plastic, alloy middle Bearing: Double ball bearing Gears: 6061-T6 aluminum Deadband Width: 1us Temperature Range: 0~55°C Dimensions: 22.8 x 12.2 x 28.5mm Weight: 13g Output Splines: 25T (compatible with Futaba) Servo Plug: JR type Servo Lead Length: 250mm Included: 1 x Towerpro MG90D 360° Digital servo 3 x Servo horn 1 x servo horn screw 2 x servo mounting screw
-
-
Included: 2 x CW 2216 920kv motor 2 x CCW 2216 920kv motor 4 x Anodised prop nut Specs: KV(RPM/V): 920KV Lipo cells: 3-4 Cell (using smaller props for 4S setup) Max current: 255W Max Amps: 18A No Load Current: 0.55A/10V Number of Poles: 12/14 Motor Shaft: 4mm prop shaft: CW/CCW 8mm/6mm threads quick release style Weight: 58g bolt hole spacing: 16mm*19mm Lamination thickness: 0.2 mm Magnets: N45 SH Bearing: EZO Japan Balancing spec: 0.005g -
Features: • Powerful 5.5V/6A Switching BEC • Optional programming card for convenient setup • Super fine throttle resolution provides first-rate and highly accurate linearity • Super smooth adjustable start-up mode • Constant RPM mode (governor mode) • Adjustable F3A brake. • 3 steps adjustable normal EMF brake • High anti-interference capability • Low voltage cut-off protection with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4 • Soft cut-off option at low voltage, slows motor RPM gradual rather than hard cutoff (LVC) • Low voltage cut-off can be disabled • Variable cut-off voltage / cell • Active free-wheeling circuit allows for unlimited "partial load" capability • LED status display • Adjustable motor timing from 0° to 30° • Blocked rotation protection (senses a jammed motor and stops motor rotation) • Motor reversing from ESC (no need to change ESC/motor wires) • Over-temperature protection and overload alarm • Anti sparking circuit: reduces connection sparks (for HV ESC) • Throttle signal lose protection. If the signal is lost for 3 seconds, the power will automatically cut-off. • Safe power-on. (Motor will not start until throttle is returned to lowest position) Max Cont Current: 80A Max Burst Current: 100A for 10 seconds Input Voltage: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery BEC: 5.5V/6A Switching BEC PWM: 8~16 KHz Max RPM: 240,000rpm for 2 Poles Brushless Motor PCB Size: 50x30mm Weight: 70g (including wires) ***This ESC is compatible with both helicopter and airplane models.*** -
Capacity: 2200mAh Voltage: 3S1P / 3 Cell / 11.1V Discharge: 60C Constant / 120C Burst Weight: 208.1g (including wire, plug & case) Dimensions: 104x33.6x26.17mm Balance Plug: JST-XH -
Capacity: 2200mAh Voltage: 4S1P / 4 Cell / 14.8V Discharge: 60C Constant / 70C Burst Weight: 263g (including wire, plug & case) Dimensions: 105x35x37mm Balance Plug: JST-XH Discharge Plug: XT60 -
Features: (R820X V2 s.BUS) • Compatible with DSM2/DSMX 1024/2048 aircraft radio and module systems • True diversity long antennas that can be placed in convenient locations in the aircraft • Easily replaceable antennae using u.Fl connectors (not soldered) • Ultra-fast brownout recovery and programmed fail safe mode • Wide input voltage: 3.7~9.6V • 8 Channels PWM • 12 channels s.Bus • Extremely long range: Control - 2 Km or more (LOS), Telemetry - 400m or more (LOS) • Integrated telemetry for real time readings: Temperature, Battery Voltage, Receiver pack Voltage, Motor RPM, Current • If required, integrated telemetry function can be disabled during binding. • Satellite receiver port (Satellite receiver not provided) Specs: (R820X V2 s.BUS) Channels: 8 PWM 12 SBUS Input voltage: 3.7~9.6V Range: 2km Dimensions: 49 x 28 x 15.5mm Weight: 14g
