-
Specs: Weight: 350g (w/out electronics) Boom Length (from boom base to motor shaft center): Front Booms: 250mm Rear Boom: 265mm Motor Bolt Holes: 16/19/25mm Requires: 28-XX or 35-XX brushless outrunner motor x 3 18~25A brushless ESC x 3 High speed micro/mini servo for the tail x 1 8x4~10x4.7 propeller x 3 (2 standard/1 reverse rotation) Multi-rotor control board 1800~2200mAh 11.1V lipo 4CH Transmitter & Receiver -
Specs: Weight: 160g Wheelbase: 295mm opened (150mm collapsed) Propellers: 5~8 inch (6~7 recommended) ESC's: 10~20A (Afro 12A recommended) Motor: 2206~2209 class (2206 recommended) 14~19mm slot mounting (sold separately) FC: CC3D,Naze32,KK Mini, HKPilot Mini or similar size (sold separately) Servo: micro metal gear servo (sold separately) Included: Quanum Trifecta frame kit Power distribution board Battery strap Hardware and cable ties Required: Motors: 3 x 2206~2209 class (2206 'Baby Beast' motors recommended) 14~19mm slot mounting ESC's: 3 x 10~20A Flight Controller: CC3D, Naze32, KK Mini, HKPilot Mini or similar size Propellers: 3 x 5~8 inch Lipo: 1000mah~1400mah 3S Lipo Servo: 1 x 9G metal geared servo -
Included: 2 x CW 2216 920kv motor 2 x CCW 2216 920kv motor 4 x Anodised prop nut Specs: KV(RPM/V): 920KV Lipo cells: 3-4 Cell (using smaller props for 4S setup) Max current: 255W Max Amps: 18A No Load Current: 0.55A/10V Number of Poles: 12/14 Motor Shaft: 4mm prop shaft: CW/CCW 8mm/6mm threads quick release style Weight: 58g bolt hole spacing: 16mm*19mm Lamination thickness: 0.2 mm Magnets: N45 SH Bearing: EZO Japan Balancing spec: 0.005g -
Specs: KV(RPM/V): 640 Lipo cells: 2~5s Max Watts(W): 550 Max. current: 30A (10 secs) No Load Current: 0.6A Intemal Resistance: 0.120 ohm Number of Poles: 14 Shaft Size: 4mm Dimensions(Dia.xL): 42 x 26mm Bolt Holes Spacing: 25mm Bolt thread: M3 Connector: 3.5mm bullet type connector Weight: 97g (motor only without adapters and screws)
-
-
Features: • CNC aluminum alloy parts • Magnetic or ball bearing supported balancing options • Cone prop adapter pieces designed to accept regular and T-style propellers and self tightening props • Rubber feet provide a stable base and protect the surface from scratches • Quick assemblying kit Specs: Dimensions: 130x85x170mm Max Prop Diameter: 12 inch (Bearing Mode) -
A small lightweight servo that is an upgraded version of the stalwart Towerpro MG90S analogue servo but with more torque, greater speed and the ability to rotate continuously through 360° at full travel, this 360° feature is perfect for robotic use. It is fitted with upgraded 6061-T6 aluminum gears and shafts and has a ballraced output. The middle case is made of alloy which acts as a heatsink for the motor and electronics which enables them to keep cool when being worked hard. Supplied complete with a selection of 3 servo horns and mounting screws. Features: • High resolution • Accurate positioning • Fast control response • Constant torque throughout the servo travel range • Excellent holding power • Ability to rotate continously through 360° in both directions Specs: Input Voltage: 4.8~6.6V Operating Torque: 2.1kg@4.8V, 2.4kg@6.6V Operating Speed: 0.6sec/60°@4.8V, 0.48sec/60°@6.6V Normal Servo Travel: 90° (45° each way) 360° when full travel is reached Case: Top & bottom plastic, alloy middle Bearing: Double ball bearing Gears: 6061-T6 aluminum Deadband Width: 1us Temperature Range: 0~55°C Dimensions: 22.8 x 12.2 x 28.5mm Weight: 13g Output Splines: 25T (compatible with Futaba) Servo Plug: JR type Servo Lead Length: 250mm Included: 1 x Towerpro MG90D 360° Digital servo 3 x Servo horn 1 x servo horn screw 2 x servo mounting screw
-
-
Professionally built multirotor
The Titus is a high quality 600 size multi-rotor frame like no other, with its genuine high quality carbon fiber and aluminum construction, the integrated tail servo mount is CNC cut from high grade aluminum and is dual ball raced which provides super smooth operation and yaw response. The Titus-600 is packed with features which include an adjustable rear arm position, Integrated PCB distribution board, folding arms for easy transportation and storage, large T-shaped undercarriage for camera clearance / protection and built-in camera gimbal suspension rails. The arms and main landing gear struts of the Titus-600 are manufactured from high quality 16mm carbon fiber tube, which provide excellent strength and durability, while the layout of the arms and size of the upper and lower main boards means there is plenty of space available for mounting electronics and your preferred fpv gear. Features: • Super strong 16mm carbon fiber tubes provide excellent durability • Integrated PCB distribution board • Adjustable rear arm length • Folding arms for easy transportation and storage • Dual ball raced yaw servo system for super smooth operation and response • Large T-shape landing provides protection for FPV camera systems • Frame provides ample mounting space for flight controllers and electronics • Built-in camera gimbal suspension rails Specifications: Diameter: 600mm Weight: 450g Height: 248mm Assembled Landing Gear Width: 305mm 3S 5000mah Lipo for long flight time KK Mini flashed with latest software for better stability and more functions 11 inch props (frame can support up to 15 inch props) smooth and durable motors thrust to weight 2:1 all units weight AUW is 1350g 20a ESCs flashed with latest SimonK firmware and can be easily flashed to BLheli firmware if needed upgradability as the frame supports bigger motors, propellers and batteries. Requires: your own 6 channel transmitter & receiver
