-
For the distribution of power from the flight battery to your six ESC's, this 24k gold plated hub offers a very neat and efficient solution. It has 3.5mm bullet connectors and 6x 3mm terminals on the back. It is stable at high currents and has minimal power loss. Features: • High efficiency • Neat instillation • 3.5mm Bullet connectors • Easy solder 3mm holes • All necessary hardware included Specs: Dimensions: 28x19x8.5mm Weight: 7g -
Harder version for more stable flights, this props wont flex under the weight of the multirotor Specs: Size: 6030 (6x3) Hub: 5mm (adapters included for 4mm,3mm,2.5mm) Included: 2 x CW rotation 2 x CCW rotation Adapters -
This FPV A/V cable connects to your ActionCam via the USB port and allows for live video output for FPV use. One end has the micro USB connector, the other has four bare wire leads for connecting to your FPV transmitter. ActionCam cameras are compatible with this cable and support the live A/V out function, as well as some SJ4000 cameras with firmware N201405270ZV01 or later*.
-
-
Specs: KV(RPM/V): 980 Lipo cells: 2~3s Max Watts(W): 165 Max. current: 15A (10 secs) No Load Current: 0.5A Intemal Resistance: 0.145 ohm Number of Poles: 14 Shaft Size: 3 x 2mm Dimensions(Dia.xL): 28 x 29mm Bolt Holes Spacing: 16 & 19mm Bolt thread: M3 Connector: 3.5mm bullet type connector Weight: 59g (motor only without adapters and screws) -
Specs: KV(RPM/V): 640 Lipo cells: 2~5s Max Watts(W): 550 Max. current: 30A (10 secs) No Load Current: 0.6A Intemal Resistance: 0.120 ohm Number of Poles: 14 Shaft Size: 4mm Dimensions(Dia.xL): 42 x 26mm Bolt Holes Spacing: 25mm Bolt thread: M3 Connector: 3.5mm bullet type connector Weight: 97g (motor only without adapters and screws)
-
-
Included: 2 x CW 2216 920kv motor 2 x CCW 2216 920kv motor 4 x Anodised prop nut Specs: KV(RPM/V): 920KV Lipo cells: 3-4 Cell (using smaller props for 4S setup) Max current: 255W Max Amps: 18A No Load Current: 0.55A/10V Number of Poles: 12/14 Motor Shaft: 4mm prop shaft: CW/CCW 8mm/6mm threads quick release style Weight: 58g bolt hole spacing: 16mm*19mm Lamination thickness: 0.2 mm Magnets: N45 SH Bearing: EZO Japan Balancing spec: 0.005g -
Specs: Weight: 160g Wheelbase: 295mm opened (150mm collapsed) Propellers: 5~8 inch (6~7 recommended) ESC's: 10~20A (Afro 12A recommended) Motor: 2206~2209 class (2206 recommended) 14~19mm slot mounting (sold separately) FC: CC3D,Naze32,KK Mini, HKPilot Mini or similar size (sold separately) Servo: micro metal gear servo (sold separately) Included: Quanum Trifecta frame kit Power distribution board Battery strap Hardware and cable ties Required: Motors: 3 x 2206~2209 class (2206 'Baby Beast' motors recommended) 14~19mm slot mounting ESC's: 3 x 10~20A Flight Controller: CC3D, Naze32, KK Mini, HKPilot Mini or similar size Propellers: 3 x 5~8 inch Lipo: 1000mah~1400mah 3S Lipo Servo: 1 x 9G metal geared servo
